Alloy Wheel Refurbishment



Renovating alloy wheels. They require a lot more looking after although alloy wheels look much better than your average steel wheel. Rain, wind and grit can hit the top of the alloys, brake dust can also get into the top to destroy your alloy wheels. Just somewhat scuffing the kerb may give your alloys a tough looking edge.

There are two means of refurbishing alloy wheels. One way would be to let the experts do it, or if the damage is only decorative the fixing can be carried out at home with several tools and a little elbow grease. The first job is to mask up the tyres and any painted regions with newspaper and masking tape on areas you do not want to http://www.mintalloys.co.uk/ be affected. Most alloy wheels have a lacquer finish and this lacquer will ordinarily have to removed first. Loose or flaky lacquer can be taken out with a wooden scraper, (avoid more of the wheel). damage using metal scrappers in case they slip and. Then the rest of the lacquer might be taken off with some type of paint stripper. Take the ordinary precautions to avoid the stripper coming in to contact with your skin. Use someone rubbing compound with a damp cloth to disguise any small pitted areas, once the lacquer has been removed. You might need to also use some good grade wet and dry paper to get rid of any acute corrosion.

If there's any moderate impact destruction, then utilize a small grinding rock, a metal brush or perhaps a flap wheel on a drill to smooth this out. Take away the minimum number of metal possible and as soon as you have got the area looking fairly smooth again you might need some rubbing compound. Once most of the impact damage and corrosion has disappeared, the wheel will have to be polished. Locate an appropriate Alloy polish available from most good car accessory stores. Use plenty of elbow grease as you can to get your wheels to as large a shine. Use a non-downy rag to use the polish and then utilize a smooth fabric to buff it up. The following stage will be to give the wheels a re lacquer with clear coat lacquer by means of a narrow paint brush to apply it. All should be available from most accessory stores along with your wheels should look as good as new.
Search form
Display RSS link.
Link
Friend request form

Want to be friends with this user.

QR code
QR